This $65 ROG Xbox Ally X case is expensive, nevertheless it’s the very best you should purchase

I’ve lined just a few of dbrand’s Killswitch instances at this level, together with one designed for the unique ROG Ally X and one other created for the Switch 2. They’re all the time arguably a bit overpriced, however in some sense, you get what you pay for. They provide all-around safety that features the entrance, again, and sides of the console, alongside a journey cowl and skins that cowl its entrance.

In the case of the ROG Xbox Ally X, I used to be a bit involved. The hand held options an Xbox controller-inspired design, full with sizable arms, and I wasn’t certain if dbrand might pull it off once more given the moveable’s distinctive form. Fortunately, the attitude-filled accent maker has managed to make it occur once more. It is perhaps costly, however should you’re on the lookout for a approach to defend your expensive ROG Xbox Ally X, dbrand’s Killswitch cannot be beat.

Placing the Killswitch on the ROG Xbox Ally X generally is a bit finicky

These dreaded pull tabs are again

Like each dbrand Killswitch case I’ve used, there are a number of totally different packages out there for the ROG Xbox Ally X that each one range in worth. There’s the $60 (recurrently $75) Important equipment, which solely options the Killswitch Case, a kickstand (which is constructed into the case) and a entrance pores and skin. Then there’s the $80 (usually $100) Journey possibility that features every part from Important, alongside a journey cowl and stick grips. Lastly, there’s the Extremely tier, which is on sale for $65 proper now (down from $125), which incorporates every part from different packages, alongside two high-quality glass display screen protectors.

Usually, I like to recommend the journey package deal since you’ll be able to all the time get an honest low-cost display screen protector on Amazon, however given the low cost, the Extremely tier is the most suitable choice proper now. The appliance course of is fairly easy, however extra so than some other dbrand case I’ve used, placing the precise case on the hand-held is a little bit of a chore.

First off, including the skins is a straightforward course of that requires you to line them up with the ROG Xbox Ally X’s numerous buttons. The perimeters ruffled a bit regardless of me working my finger down it, however this a part of the pores and skin is roofed by the case anyway, so it is probably not a problem (my greatest guess is the little notches on the prime of every arm trigger this). It is value noting that there is an odd rim across the joystick that the pores and skin would not cowl. I do not know why dbrand left this area unprotected, nevertheless it seems a bit odd. That stated, it is actually not that huge of a deal.

It is the method of really placing the enclosure on the ROG Xbox Ally X that is tough. You’ll want to push the hand-held’s arms deep into the case, then use the pull tabs to carry the highest over the shoulder buttons and triggers. Whereas this sounds easy, that you must pull extremely exhausting on the tabs to get it over the buttons. At occasions, I used to be apprehensive doing this could injury the precise handheld, however as soon as I acquired over that psychological hurdle, the Killswitch snapped into place completely and every part was fantastic.

Here is the place I bumped into my first utility challenge. The highest of the Killswitch pushed down the stick-on pores and skin, regardless of me following the directions and working a cleansing fabric over it a number of occasions. I had this occur with the Ally X Killswitch case I’ve, too, so I considerably anticipated it. To resolve this challenge, you’ll be able to take away the pores and skin, warmth it up, after which reapply. What I wanted to do is wait a bit longer for the pores and skin to stick to the Xbox Ally X earlier than placing it within the case. Fortunately, dbrand despatched me a further pores and skin, so I utilized it to the hand-held, waited barely longer, after which was extra cautious when placing on the case enclosure.

Fortunately, the case feels nice

Like different Killswitch instances, the ROG Xbox Ally X iteration feels extraordinarily stable. Its rubber is grippy and high-quality, however not overly abrasive (an early model I examined felt a bit an excessive amount of like sandpaper). The case additionally suits cosy on the hand-held and would not flex in odd areas. In case you go for the Journey or Extremely possibility, you get the Journey Cowl that snaps into place and permits you to confidently simply toss the Xbox Ally X in a bag with out worrying about it getting broken. Like with the ROG Ally X, snapping it into place takes a little bit of pressure, although.

I’d have preffered dbrand used the identical elastic band-like clasp mechanism it makes use of for the Swap 2’s Killswitch case, because it would not take as a lot pressure. This time round, I made a decision to make use of the stick grips, however they are not a must have. They very simply connect to every joystick and add a little bit of extra grip to the hand-held.

In case you’re on the lookout for a high-quality approach to defend your ROG Xbox Ally X while you’re on the go, dbrand’s Killswitch has as soon as once more confirmed to be the very best on the market, so long as you are keen to shell out the money for it.